Vísita nuestro local en Los Agustinos 5478, Ñuñoa. Lunes a Viernes 9.30 a 19.00, Sábados 10:00 a 19:00 y Domingos de 10:00 a 17:00

Ver Mapa

Tu carro está vacío.

Productos 0

Envío $0

Total $0

Términos y condiciones

¿Tienes dudas? Tenemos toda la información clara en nuestro Términos y condiciones

Política de reembolso

Todo lo que necesitas saber sobre las garantías, devoluciones y reembolsos

Contáctanos

¿Tienes preguntas? Estamos aquí para ayudarte.

Política de Privacidad

Sus datos están seguros y nunca se compartirán sin consentimiento.

FBT Vertus CLA 406.2A - Line Array 4x6" - 900w

Precio: Pagando con tarjetas o

Oferta: $1.903.048

pagando con efectivo/transferencia.

Stock web no asegura disponibilidad en tienda

Si quieres realizar una compra presencial

DETALLES DEL PRODUCTO

Bi-amplified 2-way line array
4 x 165mm (6.5”) custom woofers with 38mm (1.5”) coil
Neodymium B&C compression HF driver with 36mm (1.4”) throat and 64mm (2.5”) coil
Large format FBT waveguide with 100 ° H x 25 ° V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600W rms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalization presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5”) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0°-20° in 5° steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10° to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.